working time
Mon - Sun : 7h20 - 19h00
Call us now
(012) 123 456 789

We Buy / Sell Your -  Trimble SPS850 Extreme GPS Base Station System 900MHz

Double click on above image to view full picture

Zoom Out
Zoom In

We Buy / Sell Your - Trimble SPS850 Extreme GPS Base Station System 900MHz

$0

Availability: Out of stock

Trimble SPS850 V4.13 Extreme GPS Base Station System w/ Zephyr Geodetic Model 2 Survey Antenna

 

 

Trimble SPS850 Extreme GPS System
Flexible modular receiver for permanent base station, mobile base station and rover operations for GPS modernization.

The Trimble® SPS850 Modular GPS Receiver sets new standards for fast setup and flexible operation in both base station and rover applications.
 
The Trimble SPS850 Receiver supports Global Positioning System (GPS) modernization through support of L2C code, L5 GPS carrier signal, and GLONASS protecting your investment well into the future. The new signals will improve performance in tough satellite coverage environments (deep cuttings, mines, trenches, landfill sites and around tall buildings) and at longer ranges from the base station.

Modularity provides the ability to choose the appropriate GPS antenna for the application, Zephyr Geodetic Model 2 at the base station and the Zephyr Model 2 for the mobile units. The GPS and radio antennas can be mounted high in permanent and semi-permanent base station applications so that they are clear from obstructions and provide maximum radio coverage, while the receiver is locked in a secure environment safe from theft and environmental conditions. The choice of radio antennas allows the customer to either attach it to the receiver itself for mobile base station  and rover applications, or use a high gain or directional antenna for  maximum range on large job sites.


Standard System Features:

  • Integrated GPS receiver and radio
  • Internal 450 or 900 MHz radio with Transmit/Receive capability
  • 72-channel L1/L2/L2C/L5/GLONASS GPS receiver
  • OmniSTAR XP and HP service capable
  • WAAS, EGNOS & MSAS Satellite Based Augmentation (SBAS) compatible
  • Tough housing
  • IP67 environmental rating
  • -40 °C to +65 °C (-40 °F to +149 °F) operating temperature range
  • 9V to 30V DC input power range with over-voltage protection
  • Long life integrated battery. >10 hrs operation as a base station and >12 hrs as a rover with internal Transmit/Receive radio. (New battery operating at room temperature.)
  • Integrated display and keypad for system configuration without a controller
  • Integrated Bluetooth® for cable free configuration with a controller or Bluetooth enabled radio
  • External GPS antenna choice for base station or rover operation
  • Rubber duck antenna, or attach a high gain radio antenna for maximum coverage
  • Small, lightweight design – 1.65 kg (3.64 lbs) (receiver with internal radio and battery) 4 kg (8.82 lbs) complete system weight (Rover including controller and rod)
  • Permanent or semi-permanent base station, or mobile base station versatility
  • ATV, belt, rod, supervisor’s vehicle or marine vessel mounting options for rover applications
  • Capable of all site measurement and stakeout operations within radio or cellular coverage
  • Capable of rover operation within a VRS (Virtual Reference Station) network
  • Easy-to-use menu system for fast configuration and status checking
  • Autobase for rapid and automated repeated daily base station setups
  • Supports IP so that it can be configured and checked remotely over the Internet via an Ethernet port
  • One base station receiver can broadcast corrections via multiple radio links. For example, broadcast corrections via an internal 450 MHz radio, as well as an external 900 MHz radio from the same base station receiver

SPS850 Base Station Features:

  • Provides unrestricted operational range for rovers and grade control systems
  • Base station and rover operation in a single receiver
  • Integrated Transmit/Receive radio
  • Integrated Ethernet and IP capability facilitates base station and receiver configuration over the Internet or via Ethernet connection on a computer network
  • Web-based User Interface allows for remote configuration or troubleshooting


Specifications:

General Characteristics
Keyboard and display
VFD display 16 characters by 2 rows
On / Off key for one button startup with Autobase
Escape and Enter key for menu navigation
4 arrow keys (up, down, left, right) for option scrolls and data entry
Receiver type
Modular GPS receiver
Antenna type
 Base Station
 Rover
 OmniSTAR Rover

Zephyr Geodetic Model 2
Zephyr Model 2
Z+ Antenna

Also supports legacy antennas Zephyr, Zephyr Geodetic, Micro-Centered Choke ring, Rugged micro-centered for GPS L1/L2
operation only
Physical characteristics
Dimensions (L x W x D)
24cm (9.4 in) x 12cm (4.7 in) x 5cm (1.9 in) including connectors
Weight
1.65 kg (3.64 lb) receiver with internal battery and radio
1.55 kg (3.42 lbs) receiver with internal battery and no radio
Temperature
Operating
Storage

-40 °C to +65 °C (-40 °F to +149 °F)
-40 °C to +80 °C (-40 °F to +176 °F)
Humidity
100%, condensing
Waterproof
IP67 for submersion to depth of 1 m (3.28 ft), dustproof
Shock and vibration
Shock - non operating
 
 
Shock – operating
 Vibration
Tested and meets the following environmental standards:
Designed to survive a 2m (6.6 ft) pole drop onto concrete
MIL-STD-810F, Fig.514.5C-17

To 40 G, 10 msec, saw-tooth
MIL-STD-810F, FIG.514.5C
Performance characteristics
Measurements
Advanced Trimble Maxwell 5 Custom GPS chip
Trimble R-Track ™ technology for tracking the new L2C Civil Signal
GLONASS, L5 Signal for GPS modernization
High-precision multiple correlator for L1, L2 and L5 pseudo-range
measurements
Unfiltered, unsmoothed pseudo-range measurements data for low
noise, low multi-path error, low time domain correlation and high
dynamic response
Very low noise L1, L2 and L5 carrier phase measurements with
<1mm precision in a 1 Hz bandwidth
L1, L2 and L5 Signal-to-Noise ratios reported in dB-Hz
Proven Trimble low elevation tracking technology
72 Channels L1 C/A Code, L2C, L5C, L1/L2/L5 GLONASS Full
Cycle Carrier
WAAS / EGNOS / MSAS
Code differential GPS positioning
 
 Horizontal accuracy
 Vertical accuracy
 
WAAS / EGNOS / MSAS2
 
 Horizontal accuracy
 Vertical accuracy



±(0.25m + 1 ppm) RMS, ± (9.84 in + 1 ppm) RMS
±(0.50m + 1 ppm) RMS, ± (19.68 in + 1 ppm) RMS
 
 

Typically <1 m (3.28 ft)
Typically <5 m (16.40 ft)
OmniSTAR Positioning
 XP Service Accuracy
 HP Service Accuracy

Horizontal 20 cm (7.87 in), Vertical 30 cm (11.80 in)
Horizontal 10 cm (3.93 in), Vertical 15 cm (5.90 in)
Real Time Kinematic (RTK) positioning
 
 Horizontal
 Vertical
 
Initialization time
Regular RTK operation with base station
 
RTK operation with Scalable GPS
infrastructure
Initialization reliability



±(10 mm + 1 ppm) RMS, ± (0.38 in +1 ppm) RMS
±(20 mm + 1 ppm) RMS, ± (0.78 in +1 ppm) RMS
 
 
Single/Multi-base minimum 10 sec + 0.5 times baseline length in km,
<30 km
 
<30 seconds typical anywhere within coverage area
Typically >99.9%
Electrical characteristics
Power
 Internal
 
 
 
 
 
 External


Integrated internal battery 7.4V, 7800 mAh, Li-Ion
Internal battery operates as a UPS in the event of power source outage
Internal battery will charge from external power source when input
voltage is >15V
Integrated charging circuitry
 
Power input on Lemo 7 pin 0 shell Lemo is optimized for lead acid
batteries with a cut off threshold of 10.5V
Power input on the 26 pin DSub connector is optimized for Trimble
Li-Ion battery input (PN 49400) with a cut off threshold of 9V
Power source (Internal / External) is hot swap capable in the event of
power source removal or cut off
9V to 30V DC external power input with over-voltage protection
Receiver will automatically power on when connected to external
power of 15V or greater
Power consumption
6.3w, in RTK rover mode with internal receive radio
8.5w, in RTK Base mode with internal transmit radio
Rover operation times on internal battery
 450 MHz 2.0W systems
 900 MHz 1.0W systems


12 hrs; varies with temperature
12 hrs; varies with temperature
Base station operation times on internal
battery
 External radio
 450 MHz 0.5W systems*
 900 MHz 1.0W systems



16 hrs; varies with temperature
10 hrs; varies with temperature
12 hrs; varies with temperature
Certification
Class B Part 15, 22, 24 FCC certification
Canadian FCC
CE mark approval
C-tick approval
UN ST/SG/AC.10.11/Rev. 3, Amend. 1 (Li-Ion Battery)
UN ST/SG/AC. 10/27/Add. 2 (Li-Ion Battery)
UN T1 – T8 (Li-Ion Battery)
49 CFR Sections 100-185 (Li-Ion Battery)
WEEE
Communications
 Port 1 (7-pin 0S Lemo)
 Port 2 (DSub 26-pin)
 
 
 
Bluetooth

3-wire RS-232 CAN
Full RS-232 (Via multi-port adapter)
3-wire RS-232 CAN
USB (On the Go) (Via multi-port adapter)
Ethernet (Via multi-port adapter)
Fully integrated, fully sealed 2.4 GHz Bluetooth
Integrated radios
 
 
Channel spacing (450MHz)
 
 
 
 
Frequency approvals (900MHz)
 
450MHz Transmitter radio power output
900MHz Transmitter radio power output

Fully integrated, fully sealed internal 450 MHz, TX, RX or TXRX
Fully integrated, fully sealed internal 900 MHz, TX, RX or TXRX
 
12.5 or 25KHz spacing available
Dealer Changeable with TX, TX/RX
End user settable with RX only
 
 
USA (-10), Australia (-20), New Zealand (-30)
 

0.5w / 2.0w

1.0w (30 dBm)

External GSM / GPRS, cell phone support
Supported for direct dial and internet based VRS correction streams
Cell phone or GSM/GPRS modem inside TSC2 controller
Receiver position update rate
2 Hz, 5 Hz, 10 Hz and 20Hz positioning
Data Input and Output
CMR, CMR+, RTCM V2.0, RTCM 2.1, RTCM 2.3, RTCM 3.0
Outputs
NMEA, GSOF and RT17
Carrier
Supports BINEX and smoothed carrier

 

Use spaces to separate tags. Use single quotes (') for phrases.